By creating secondary “ghost” beams to stabilize high-power lasers, ATAP researchers have laid the foundations for new applications of plasma-based accelerators.
Researchers from ATAP have developed a technique for stabilizing the lasers that drive plasma-based particle accelerators. The work could pave the way for this technology—which offers much smaller machines—as an enabling technology for next-generation colliders and light sources, opening the door to new areas of research and applications in energy, materials science, and medicine.
Laser-plasma accelerators, or LPAs, use powerful laser bursts passing through a plasma to create a moving wave capable of accelerating electrons up to a thousand times faster than conventional accelerators. They could provide a new source of high-energy electrons for conducting fundamental scientific research, developing new materials, and enabling new medical treatments.
However, many design considerations and challenges unique to the beam dynamics of LPAs “must be resolved before LPAs are capable of delivering these intense, high-quality electron beams,” says Samuel Barber, a Research Scientist at ATAP’s Berkeley Lab Laser Accelerator (BELLA) Center, who is a key member of the team that developed the technique for stabilizing lasers used to drive LPAs.
“For example, fluctuations and drifts in the laser caused by mechanical vibrations, changes in airflow, and thermal variations to optical surfaces, as well as other factors can lead to instabilities in these electron beams, which significantly limits their usefulness.”
Resolving these instabilities, he says, is critical for developing LPAs capable of producing electron beams “with the properties needed for accelerator-based applications like compact light sources, which require high-quality, high-energy beams.”
“Ghost” beams and active feedback
To improve beam stability, the researchers first trained a beam from a 100-terawatt laser at the BELLA Center onto a specially designed wedged mirror to make a spatially-separated, low-power copy of the laser’s final focus, referred to as the “ghost” beam. This ghost beam was then directed to a pair of position-sensitive detectors that monitor the beam’s position in the near and far field. The signal on these detectors, generated by a kHz-repetition-rate pilot beam that co-propagates with the high-intensity laser beam, is then used in a feedback system that employs fast-acting corrective optics to stabilize the LPA laser.
Images of the resulting electron beam taken by a magnetic spectrometer showed a “four-fold reduction in the fluctuations of the electron beams’ transverse properties,” says Barber.
“This significant improvement in the transverse stability and dispersion of the beam is an important step in improving the stability of the beams produced by LPAs, making them potential candidates for use in future applications such as plasma-based colliders or next-generation light sources applications like X-ray free-electron lasers, or XFELs.”
The work presented here appears in a recently published paper. Curtis Berger, the lead author of the paper and a graduate student researcher at the University of California, Berkeley, was mentored and supervised by Barber.
“Our focus is to continue to improve the stability and reliability of LPA sources and to develop novel schemes for producing the highest quality beams in LPAs by improving injection mechanisms for delivering electrons to the plasma wave,” says Barber.
If successful, he says the work could provide “a blueprint for designing new LPA-based electron beam injectors that would have far-reaching impacts on the future of XFELs and other applications of high-brightness electron beams.”
Commenting on the research, Jeroen van Tilborg, Staff Scientist and Deputy Director for Experiments at the BELLA Center, said, “The ongoing research could provide the next level of beam stability and precision control needed for LPAs to be a viable enabling technology for new light source applications. Seeing Sam lead his team to take this concept to fruition is a promising sign that more innovations will follow.”
Learn More
Berger, C., Barber, S., Isono, F., Jensen, J., Natal. J., Gonsalves, A., and van Tilborg, J. “Active nonperturbative stabilization of the laser-plasma-accelerated electron beam source,” Rev. Accel. Beams 26 (2023), https://link.aps.org/doi/10.1103/PhysRevAccelBeams.26.032801
